PSC FALCON 315 User's Guide download pdf (Page 82)

Extended Commands

< 6-4 > PowerNet Twin Client User Guide

Input Mode

The host application can control which inputs the terminal will accept.

A scanner, keyboard, or both can be accepted.

Input Mode parameters are controlled by sending the following

sequence to the Falcon before opening an input field:

<ESC>[!1; <mode>z.

Table 6-1

Input Mode Parameters

Mode Action Description

0 (de-

fault)

Scan

and

key

Data is initially accepted from either the keyboard or

scanner. Scanning is allowed on a partially keyed

field, which causes the keyed data to be discarded

and the scanned data to be accepted.

Scan

or key

Data is initially accepted from either the keyboard or

scanner. Scanning is not allowed on a partially

keyed field. If the operator clears the field then

scanning is again allowed.

Scan

only

Data is accepted only from the scanner; the

keyboard is turned off.

Key

only

Data is accepted only from the keyboard; the

scanner is turned off.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 137 138

No comments

PSC FALCON 315 User's Guide Page 82