PSC Magellan 8500 Service Manual download pdf (Page 10)

6 Magellan

8500

Volume/Tone Push Button

The Volume/Tone Push Button also performs multiple functions depending upon the

duration of time it is pressed:

Table 4. Volume/Tone Push Button Functions

PRESS

DURATION

FUNCTION COMMENT

Momentary (when

scanner is asleep)

Wakes scanner from

Sleep Mode

Alternatively, the scanner can be awakened by:

- Moving an object through the scan zone.

- A weight change on the scale.

- Scanning with an attached auxiliary scanner.

Momentary (when

scanner is awake)

Increments volume

Press the push button momentarily to increase

speaker volume. When the loudest volume is

reached, a repeated press of the push button cycles

volume back to the lowest setting, then volume

increases on subsequent press(es). Five volume lev-

els are available.

Hold, then release

when the beeper

sounds

Increments tone

Press the push button for approximately 2 seconds,

then release. Each time this is done, the beeper will

sound at one of three tones. Stop when the desired

tone (high, medium or low) is sounded.

4 Seconds

Scanner Diagnostics

Mode

a. By standard default, this function is normally disabled to prevent accidental activation

by users.

This mode allows system support personnel to trou-

bleshoot problems with the scanner. Generally diag-

nostics are initiated after noting a Field Replaceable

Unit (FRU) Warning (see Table 1). Cycle power to

exit Scanner Diagnostics Mode.

8 Seconds

Resets Scanner

b. Users should not perform scanner resets except under the direction of trained sys-

tems support personnel.

Only system support personnel should perform a

reset.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comments to this Manuals

No comments

PSC Magellan 8500 Service Manual Page 10

Comments to this Manuals

Related products and manuals for Bar code readers PSC Magellan 8500