PSC Power Star Specifications download pdf (Page 4)

USB POWER OUTPUT CONNECTORS:

The PSC PowerStar Mini Triple Play is equipped with three (3) USB power outputs. One of

these USB power outputs is located on the top surface of the unit near the main power switch

and LED meter. This location is convenient for use with items that require frequent plugging

and un-plugging such as your cell phone. Additionally, there are two more USB power outputs

located on the front surface of the unit near the other main power outputs. Each of these USB

connectors can supply up to 2 amps of output current making them very useful in the field.

With up to 2 amps of output power, you can use and charge nearly all available USB powered

devices. Offering a total of three, 2 amp outputs with a total current capacity of 6 amps is

another feature you will find exclusively on a PSC power distribution product.

DUAL USB CONNECTORS ON MAIN SURFACE SINGLE USB ON TOP SURFACE

VOLT METER & LOW BATTERY INDICATION:

The PSC PowerStar Mini Triple Play includes a small 3 digit, Blue LED volt meter. This meter

is conveniently located on the top panel of the unit right above the main power switch. It allows

the operator to monitor their battery voltage with just a quick look at the meter. This meter was

designed to have very low power consumption so it can operate at all times while the unit is

turned on.

The Blue LED voltage meter also serves another function. When your battery discharges to a

pre-determined point, the meter will begin to flash on and off slowly. This is your indication that

your battery is nearly discharged and should be replaced at your earliest convenience. Inside

the PowerStar Mini Triple Play there is a small jumper on the printed circuit board. This jumper

1 2 3 4 5 6 7 8 9 10 11 12

No comments

PSC Power Star Specifications Page 4